Epson PowerLite Home Cinema 2040 User Manual - Page 106
Event ID code, Cause and solution, Projection program.
View all Epson PowerLite Home Cinema 2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Event ID code 0022 0027 0028 0029 0030 0031 0035 0434 0481 0482 0485 0023 0024 0025 0432 0435 0433 0484 0483 04FE 0479 04FF 0891 Cause and solution Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. Connection failed. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image. If this does not solve the problem, restart the projector and connected devices, then check the connection settings. The EasyMP Network Projection program did not start. Turn the projector off and then on again. Cannot display the transferred images. Restart the EasyMP Network Projection program. Communication with computer was disconnected. Restart the EasyMP Network Projection program. The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again. A projector system error has occurred. Turn the projector off and then on again. Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 106