Epson PowerLite Home Cinema 2040 User Manual - Page 61
Charging the 3D Glasses
View all Epson PowerLite Home Cinema 2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Charging the 3D Glasses Charge the glasses when the status light on the glasses flashes red to indicate a low battery. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses. Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable. 2. Connect the other end of the cable to the USB Type A port on the projector or any other device such as a computer that has an active USB Type A port. Note: The projector must be turned on to charge the glasses. The glasses are fully charged when the status light on the glasses stays green. Parent topic: Viewing 3D Images 61
Charging the 3D Glasses
Charge the glasses when the status light on the glasses flashes red to indicate a low battery.
1.
Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Note:
Make sure you connect the cable in the correct orientation or you may damage the glasses or
cable.
2.
Connect the other end of the cable to the USB Type A port on the projector or any other device such
as a computer that has an active USB Type A port.
Note:
The projector must be turned on to charge the glasses.
The glasses are fully charged when the status light on the glasses stays green.
Parent topic:
Viewing 3D Images
61