Epson Stylus NX200 Quick Guide - Page 18
Printing From a Digital Camera
View all Epson Stylus NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Printing From a Digital Camera If you have a digital camera that supports PictBridge™ or USB DIRECT-PRINT printing, you can connect it to the NX200 Series and print your photos directly from the camera. Check your camera manual to see if it is compatible. Your photos must be JPEG format and sized from 80 × 80 pixels to 9200 × 9200 pixels. Note: Epson cannot guarantee the compatibility of any cameras. Some combinations of paper type, size, and layout may not be supported, depending on your camera and the NX200 Series settings. 1. Before you connect your camera, make sure your NX200 Series is turned on, but not printing. 2. Remove any memory cards from the slots. 3. Connect the USB cable that came with your camera to the USB connector on the front of your NX200 Series. 4. Load the paper on which you want to print your photos (see page 4). 5. Press the paper size button to select the size and type of paper you loaded. If you select Letter Size Plain Paper, the photos print with a white border. If you select 4"x6" Photo Paper, the photos print all the way to the edges (borderless). 6. Turn on your camera. 7. Follow the instructions that came with your camera to select your photos and settings, and print them. When you finish printing, turn off your camera and disconnect it from the USB connector on the NX200 Series. 18 Printing From a Memory Card or Digital Camera