Epson Stylus NX200 Quick Guide - Page 41
Notices, Important Safety Instructions - power cord
View all Epson Stylus NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Notices Important Safety Instructions Before using your Epson Stylus NX200 Series all-in-one, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the NX200 Series. ■ Use only the type of power source indicated on the NX200 Series label. ■ Use only the power cord that comes with the NX200 Series. Use of another cord may cause fires or shock. Do not use the cord with any other equipment. ■ Place the NX200 Series near a wall outlet where the plug can be easily unplugged. ■ Do not let the power cord become damaged or frayed. ■ If you use an extension cord with the NX200 Series, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. ■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. ■ Leave enough room around the NX200 Series for sufficient ventilation. Do not block or cover openings in the NX200 Series case or insert objects through the slots. ■ Do not place the NX200 Series near a radiator or heating vent or in direct sunlight. ■ Place the NX200 Series on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. ■ Make sure the back of the NX200 Series is at least 4 inches (10 cm) away from the wall. ■ Do not open the scanner section while the NX200 Series is copying, printing, or scanning. ■ Do not spill liquid on the NX200 Series. ■ Except as specifically explained in your documentation, do not attempt to service the NX200 Series yourself. Notices 41