Epson Stylus Pro 3800 Professional Edition Product Information Guide - Page 15

5. Carefully pull the cartridge straight out of the slot and dispose of it properly. Warning: Do not shake the expended cartridge, or ink may leak out. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. Epson Stylus Pro 3800 9. Close the ink cover and press it until it clicks. 6. Make sure the replacement ink cartridge is the correct color, and then remove it from its package. 7. Shake the ink cartridge well before installing it. When you see READY on the LCD, the printer is ready to print. 8. Hold the ink cartridge with the arrow mark facing up and pointing to the back of the printer, and then insert it into the slot until it clicks. Arrow mark Replacing the Maintenance Cartridge The maintenance cartridge stores ink that gets flushed from the system during print head cleaning. When the cartridge is almost full, the message MAINTENANCE CARTRIDGE IS NEARLY FULL appears on the LCD panel. When the cartridge is completely full, the printer stops working and REPLACE THE CARTRIDGE appears on the LCD. You can check how much space remains in the maintenance cartridge by viewing its indicator on the control panel, as shown below. You can also check its status using the printer's menus (see page 11) or by printing a nozzle check sheet (see page 12). The printer has a protection system to prevent improper cartridge insertion. If you cannot insert the ink cartridge easily or if you see the message INK CARTRIDGE ERROR on the LCD panel, the type of cartridge may be incorrect. Check the package and product code. If the B ink light remains on, the ink cartridge may not be installed correctly. Remove the ink cartridge and then reinsert it as described above. Maintenance cartridge indicator (showing a new cartridge) Replacement cartridges are available from Epson (product code T582000). 12/06 Epson Stylus Pro 3800 - 15