Epson Stylus Pro 7000 Printer Guide - Page 17
Installing the EpsonNet Internal Print Server or FireWire Interface Card - drivers
View all Epson Stylus Pro 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 1: Connecting Your Printer and Installing Drivers Note You can't use both the USB and Parallel interfaces at the same time. Once your printer is set up, you're ready to connect it to your individual computer or network and install the drivers. If you have the RIP Station 5100, you need to connect the printer to the RIP and install the RIP software. See the RIP Station 5100 Getting Started for instructions. For non-PostScript printing using the EPSON driver, you can install the EpsonNet Internal Print Server and connect the printer to your network, or use one of the built-in interfaces to connect to an individual computer. You can also install the EPSON FireWire® interface card for fast connection, if your system supports it. If you connect the printer directly to a networked computer, you can use the Macintosh or Windows printer sharing feature to allow printing over your network. This chapter provides instructions for the following: • Installing the EpsonNet Internal Print Server or FireWire interface card • Connecting to the USB interface • Connecting to the parallel interface • Installing the software and setting up printer sharing on a Macintosh • Installing the software and setting up printer sharing in Windows Installing the EpsonNet Internal Print Server or FireWire Interface Card For additional connectivity without a RIP, you can install one of the following cards in your printer: • EpsonNet Internal Print Server (10 Base T/100 Base TX)-C823632A • EPSON FireWire Interface Card (Type B IEEE 1394)-C823722 1