Epson Stylus Pro 7900 Proofing Edition Network Guide - Page 9
Network Interface Operation, Status lights, Network connector
View all Epson Stylus Pro 7900 Proofing Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Network Interface Operation Status lights The status lights provide you with important information on the operation of the network interface. Indicates connection type RJ-45 connector Flashes when data is received The light on the left indicates whether the network interface is connected to a 10Base-T (green) or 100Base-TX (orange) network. The light on the right flashes when data is being transmitted. If the light on the left is solid green and the light on the right is off, the printer is not connected to the network. Network connector The RJ-45 connector is used to connect an Ethernet cable to a network. You can use an Ethernet cable for both 10Base-T and 100Base-TX. c Caution: You must use a Category-5 or higher shielded twisted-pair cable to connect the network interface to a network. Introduction 9