Epson TM-m30II Technical Reference Guide TM-m30II - Page 110
Auto Reconnect, Feature, Enabled, Disabled, Reconnection sequence]
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Appendix Auto Reconnect Feature Printer operations when Bluetooth is disconnected Reconnecting to iOS device Switch to connection from other device Enabled Disabled Perform the following reconnection sequence. [Reconnection sequence] 1. The printer tries to connect to the iOS device to which it was last connected. 2. When step 1 fails, the printer waits for connections from other devices. 3. If connection is not established in step 2, the printer tries again to connect to the iOS device to which it last connected. Steps 1 and 2 are repeated until a connection is established. Wait for a connection from the Bluetooth device. Reconnect automatically. Make settings on the Bluetooth settings screen on the iOS device. Method 1: After disabling the Bluetooth feature of the connected iOS device, make connection settings on the Bluetooth device that you want to connect. (When the auto reconnect feature is enabled, it may take some time to connect.) Method 2: After disconnecting from the connected iOS device using applications with the TM Utility or Epson ePOS SDK disconnection feature, make settings on the Bluetooth device you want to connect. ∗ In the following situations, even if the feature is enabled, the same operations are performed as when it is disabled. - When pairing is canceled from the connected iOS device. - When the last Bluetooth device connected was not an iOS device. - When wireless communication settings are initialized from the printer. ∗ Disable this feature when using the printer from devices that are not running iOS. Otherwise, it may take some time to connect. 110