Epson TM-m30II Technical Reference Guide TM-m30II - Page 56
Network Settings, Setup methods, Flow of Setup
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 3 Advanced Usage Network Settings The following explains the procedure for network settings in order to connect the product to your network. Setup methods There are three methods for set up. Method 1: Setup using EpsonNet Config This method involves installing the network configuration tool, EpsonNet Config, on your computer for setting. As it does not require any settings in advance to allow set up, you can easily perform set up using a computer already connected to the network. Download EpsonNet Config from the Epson website. Method 2: Setup using EpsonNet Config (Web version) This method involves opening the Web application equipped in the printer from a Web browser to perform settings. Because you specify the printer's IP address to open it, you need to set your computer to the same network segment as the printer. With EpsonNet Config (Web version), you can set more items than with EpsonNet Config. Method 3: Setup using arp/ping commands This method involves setting the printer's IP address in the setting computer's arp/ping commands, then using the setting tool to change the other settings. The setting computer must be in the same segment as the printer. Also, settings can be done only when the printer's arp+ping IP setting is set to Enable. Use EpsonNet Config or EpsonNet Config (Web version) for settings other than the IP address. Flow of Setup Method 1 Method 2 Method 3 Printing the status sheet (check settings) (See "Printing a Status Sheet" on page 71.) Setup using EpsonNet Config Change network settings on setting computer Use EpsonNet Config (Web version) to perform settings Use arp/ping command to set printer IP address - Use EpsonNet Config to perform other settings - Use EpsonNet Config (Web version) to perform other settings Finish Finish Finish 56