Epson TM-m30II Technical Reference Guide TM-m30II - Page 20
Error Status
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 Product Overview Power LED Error LED Paper LED Wi-Fi LED Ethernet Bluetooth LED LED Printer Status F O F O O O While forced updating firmware mode is on F *3 N O O O O During turn-off process F *4 O O O O O During power off NOTE: The printer enters this status while processing the power off command. It is recommended to use this method when you need to save information on the printer's operating status if the power is cut without using the power switch. *1: Only the printers that are equipped with a roll paper near-end detector. To detect this status (remaining amount of roll paper is low), enable the "Roll paper near-end detection" function. For more details, see "Software Settings" on page 47. This function can be used only with a 80-mm width roll paper and only when the printer has been set up to eject printed paper from the front side. For more details about the restrictions, see "Enabling the Roll Paper Near-End Detection" on page 46. *2: The Error LED flashing pattern is: lighting for 160 ms followed by a pause for 2400 ms. The LED goes off after repeating the pattern for five seconds. *3: The Power LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms. *4: The Power LED flashing pattern is: lighting for 160 ms followed by a pause for 2400 ms. Error Status There are three possible error types: automatically recoverable errors, recoverable errors, and unrecoverable errors. Automatically Recoverable Errors • Head temperature error • Cover open error (in the middle of printing) The printer recovers from the error when the head temperature drops. The printer recovers from the error when the roll paper cover is closed. 20
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30ii-3ab69b8/20.png)