Epson TM-m30II Technical Reference Guide TM-m30II - Page 99

Paper Specifications, Paper width 58 mm

Get Epson TM-m30II PDF manuals and user guides View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

Appendix Paper Specifications Paper types Form Size Roll paper diameter Roll paper core Roll width when taken up Paper width Paper thickness Specified original paper type Paper width 58 mm Paper width 80 mm Specified thermal paper Roll paper 83 mm {3.27"} maximum Outside: 18 mm {0.71"} 58 + 0.5/-1.0 mm {2.28 + 0.02/-0.04"} 80 + 0.5/-1.0 mm 57.5 ± 0.5 mm {2.26 ± 0.02"} 79.5 ± 0.5 mm Maximum of 80 μm, minimum of 48 μm TF50KS-EY, TF60KS-E PD160R, PD190R P220AGB-1 AP45KS-ND, AP50KS-ND F50417(55), F50417(48) KT55FA, KT48FA, KT55PF, KT48PF NIPPON Paper Industries Co., Ltd. OJI Paper Mfg. Co., Ltd. Mitsubishi Paper Mills Limited. Jujo Thermal Oy Mitsubishi HiTec Koehler Paper Group • Paper must not be pasted to the roll paper core. • To keep the print quality, it is recommended to change the print densities for each roll paper. See "Software Settings" on page 47. • Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause the thermal head to stick to the thermal paper surface during printing, and cause printing failure and other problems. The pre-printing also can result in reduced print density. Using thermal paper with a pre-printed recording surface, pre-printing should be done in accordance with the conditions (ink type, printing and other conditions) recommended by the paper manufacturer, and the thermal paper should be checked to ensure that there is no faulty printing, loss of print density, or other problems. 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
99
Appendix
Paper Specifications
Paper width 58 mm
Paper width 80 mm
Paper types
Specified thermal paper
Form
Roll paper
Size
Roll paper diameter
83 mm {3.27"} maximum
Roll paper core
Outside: 18 mm {0.71"}
Roll width when taken up
58 + 0.5/-1.0 mm {2.28 + 0.02/-0.04"}
80 + 0.5/-1.0 mm
Paper width
57.5 ± 0.5 mm {2.26 ± 0.02"}
79.5 ± 0.5 mm
Paper thickness
Maximum of 80 μm, minimum of 48 μm
Specified original paper type
TF50KS-EY, TF60KS-E
NIPPON Paper Industries Co., Ltd.
PD160R, PD190R
OJI Paper Mfg. Co., Ltd.
P220AGB-1
Mitsubishi Paper Mills Limited.
AP45KS-ND, AP50KS-ND
Jujo Thermal Oy
F50417(55), F50417(48)
Mitsubishi HiTec
KT55FA, KT48FA, KT55PF, KT48PF
Koehler Paper Group
•
Paper must not be pasted to the roll paper core.
•
To keep the print quality, it is recommended to change the print densities for each roll paper.
See
"Software Settings" on page 47
.
•
Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause
the thermal head to stick to the thermal paper surface during printing, and cause printing
failure and other problems. The pre-printing also can result in reduced print density. Using
thermal paper with a pre-printed recording surface, pre-printing should be done in accordance
with the conditions (ink type, printing and other conditions) recommended by the paper
manufacturer, and the thermal paper should be checked to ensure that there is no faulty
printing, loss of print density, or other problems.