Epson TM-m30II Technical Reference Guide TM-m30II - Page 96

Printing Specifications

Get Epson TM-m30II PDF manuals and user guides View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

Appendix Printing Specifications Printing method Dot density Printing width 48/35 characters mode 42/32 characters mode The number 48/35 characters mode of characters 42/32 characters mode Line spacing Maximum print speed*3 Multi-tone graphics printing Paper width 58 mm Paper width 80 mm Thermal line printing 203 × 203 dpi 52.5 ± 0.2 mm {2.07 ± 72.0 ± 0.2 mm {2.83 ± 0.01"}, 420 dots 0.01"}, 576 dots Font A (12 × 24) Font B (10 × 24) 52.5 ± 0.2 mm {2.07 ± 0.01"}, 420 dots 35 42*1 68.3 ± 0.2 mm {2.69 ± 0.01"}, 546 dots 48*1 57 Font C (9 × 17) 46 64 Special Font A 35 48 Special Font B 46 64 Kanji Font A (24 × 24) 17*1 24*1 Kanji Font B (20 × 24)*2 26 36 Font A (12 × 24) 32 42 Font B (10 × 24) 42 54 Font C (9 × 17) 46 60 Special Font A 35 45 Special Font B 46 60 Kanji Font A (24 × 24) 16 21 Kanji Font B (20 × 24)*2 26 34 3.75 mm {1/5"} (initial setting, programmable by command) 250 mm/s {9.84"/s}*4 Up to 16 color tones dpi: dots per inch *1: Initial setting *2: Korean model only *3: When the printer prints with the standard print density level at 25°C {77°F} and 24V. *4: The maximum is 100 mm/s {3.94"/s} when printing ladder barcodes, 2-dimensional symbols, or multi-tone graphics. • The print speed changes automatically depending on the applied voltage and head temperature. • If the data transmission speed is slower than the maximum print speed, the print speed may fluctuate and the print result may become shaded and/or dot displacement in paper feeding may occur. Furthermore, if the data transmission speed is much slower than the maximum print speed, intermittent printing will occur. 96

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
96
Appendix
Printing Specifications
dpi: dots per inch
*1: Initial setting
*2: Korean model only
*3: When the printer prints with the standard print density level at 25°C {77°F} and 24V.
*4: The maximum is 100 mm/s {3.94"/s} when printing ladder barcodes, 2-dimensional symbols, or multi-tone graphics.
Paper width
58 mm
Paper width
80 mm
Printing method
Thermal line printing
Dot density
203 × 203 dpi
Printing
width
48/35 characters mode
52.5 ± 0.2 mm {2.07 ±
0.01"}, 420 dots
72.0 ± 0.2 mm {2.83 ±
0.01"}, 576 dots
42/32 characters mode
52.5 ± 0.2 mm {2.07 ±
0.01"}, 420 dots
68.3 ± 0.2 mm {2.69 ±
0.01"}, 546 dots
The number
of characters
48/35 characters mode
Font A (12 × 24)
35
48
*1
Font B (10 × 24)
42
*1
57
Font C (9 × 17)
46
64
Special Font A
35
48
Special Font B
46
64
Kanji Font A (24 × 24)
17
*1
24
*1
Kanji Font B (20 × 24)
*2
26
36
42/32 characters mode
Font A (12 × 24)
32
42
Font B (10 × 24)
42
54
Font C (9 × 17)
46
60
Special Font A
35
45
Special Font B
46
60
Kanji Font A (24 × 24)
16
21
Kanji Font B (20 × 24)
*2
26
34
Line spacing
3.75 mm {1/5"}
(initial setting, programmable by command)
Maximum print speed
*3
250 mm/s {9.84"/s}
*4
Multi-tone graphics printing
Up to 16 color tones
•
The print speed changes automatically depending on the applied voltage and head
temperature.
•
If the data transmission speed is slower than the maximum print speed, the print speed may
fluctuate and the print result may become shaded and/or dot displacement in paper feeding
may occur. Furthermore, if the data transmission speed is much slower than the maximum print
speed, intermittent printing will occur.