Epson TM-m30II Technical Reference Guide TM-m30II - Page 41
Setting up from a Windows Computer
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 Setup Setting up from a Windows Computer Necessary Items Prepare the following items. • Computer for setting: Windows 10/8/7 Computer equipped with a wireless LAN function • Utility for setting: EpsonNet Config or EpsonNet Config (Web version) Follow the steps below to connect the printer. 1 Turn on the printer. After starting the printer, check that the "SimpleAP Start" is printed. If it is not printed, enter the Interface Setup mode and restart the printer in the SimpleAP mode. For more details, see "Interface Setup Mode" on page 67. 2 Activate Windows Wireless Network Connection and select [EPSON_Printer] as the connection device on the screen that appears. If the window to enter a pass phrase appears, enter "12345678". Default settings on printer are the following values. Network mode SSID Pass phrase IP Address SimpleAP mode EPSON_Printer 12345678 192.168.192.168 3 When connecting to the printer is complete, setup the Wireless LAN using the network setup tool, EpsonNet Config or EpsonNet Config (Web version). For details about EpsonNet Config, see "Setup using EpsonNet Config" on page 57. For details about EpsonNet Config (Web version), see "Setup using EpsonNet Config (Web version)" on page 58. 4 When setting the Wireless LAN is complete, restart the printer. 41
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30ii-3ab69b8/41.png)