Epson TM-m30II Technical Reference Guide TM-m30II - Page 37
Connecting to the Power Source, Connecting the AC cable
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 2 Setup Connecting to the Power Source WARNING • Be sure to use the specified AC adapter (AC adapter, C1) only. • Never insert the AC cable plug into a socket that does not meet the input voltage of the AC adapter. Doing so may result in damage to the printer. • Should a fault ever occur, immediately turn off the power to the printer and unplug the AC cable from the socket. When disconnecting the DC cable of the AC adapter from the printer, make sure that the AC cable is not connected, and then hold the arrow-printed portion of the connector to pull it straight out. Arrow-printed portion of the connector Connecting the AC cable 1 Make sure the printer is turned off. 2 Connect the AC cable to the AC adapter. AC adapter AC cable 3 Connect the DC cable of the AC adapter to the power supply connector. 37