Epson TM-m30II Technical Reference Guide TM-m30II - Page 55
Communication condition of USB interface, Communication condition of, interface
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 3 Advanced Usage Communication condition of USB interface Class • USB printer class (initial setting) • USB vendor-defined class Communication condition of Bluetooth interface • Device name (initial setting: TM-m30II_xxxxxx) • Passkey (initial setting: 0000) • Security (initial setting: Low) • Auto Re-Connect with iOS device (initial setting: Enabled) The device name is initially set to TM-m30II_xxxxxx. (xxxxxx refers to the last 6 digits of the serial number labeled on the back of your printer.) Bluetooth communication interval during power saving mode • Level 1 (Standard) (Initial setting) • Level 2 (Short) By changing the setting to "Level 2 (Short)," you can shorten the time until printing begins or the time until information is shown on the customer display connected to the printer. However, because the communication frequency increases, the power consumption of the printer and the host also increases. Also, depending on the host, this setting may not be enabled, and the host-specified communication interval may be used. 55