Epson U01II User Manual - Page 79
Port is being used by combo box, Detailed settings of the port, BaudRate combo box
![]() |
UPC - 000055894678
View all Epson U01II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Version 2.65 Jul. 2009 "Port is being used by" combo box This combo box contains a list of devices already set up for the port number selected. Detailed settings of the port The settings from "BaudRate" to "Handshake" apply to the serial port. Change these settings to match the printer's settings. If the detailed settings of a master device in Hydra connection are changed, then the settings of its slave devices are also changed automatically. Also, as mentioned above, the detailed settings of the slave devices cannot be changed directly. "BaudRate" combo box Use this combo box to display or set the communication speed of the serial port. The values that can be used depend on the device information file (INF file). For information on the communication speed, refer to the hardware manual of the device. If the selected port is parallel, USB, network, wireless port, or "None", then this setting cannot be set or changed. For a slave device in Hydra connection, the speed is displayed but cannot be modified. "BitLength" combo box Use this combo box to display or set the data bit length of the serial port. The values that can be used depend on the device information file (INF file). For information on data bit length of the device, refer to the hardware manual of the device. If the selected port is parallel, USB, network, wireless port, or "None", then this setting cannot be set or changed. For a slave device in Hydra connection, the value is displayed but cannot be modified. "Parity" combo box Use this combo box to display or set the parity bit length of the serial port. The values that can be used depend on the device information file (INF file). For information on parity bit of the device, refer to the hardware manual of the device. If the selected port is parallel, USB, network, wireless port, or "None", then this setting cannot be set or changed. For a slave device in Hydra connection, the value is displayed but cannot be modified. 74 User's Manual Installer, SetupPOS, TMUSB
![](/manual_guide/products/epson-c31c489111-user-manual-2e24d5e/79.png)