Epson WorkForce 500 Quick Guide - Page 20

If you need to fax additional pages, place your original on the scanner glass or in the Automatic Document Feeder. Then press OK to continue. If you do not need to fax another page, press Back. Your document is faxed. Note: If the fax number is busy, you see a redialing message and the WorkForce 500 Series redials after one minute. To redial immediately, press Redial/Pause. Other Ways to Dial a Fax Number In addition to manual transmission, here are some other ways you can enter a fax number: ■ If you've connected a telephone to the WorkForce 500 Series, you can dial the fax number from the phone. When you see the screen at right, select Send, then press OK. Note: Don't hang up the phone until you begin transmitting the fax. ■ To select a speed dial entry, press Speed Dial/ Backspace. Select or type the number of the speed dial entry you want to use, then press OK. ■ To redial the last fax number you used, press Redial/ Pause. The last fax number is displayed on the screen. ■ Press Menu and select Fax Delay to specify a different time to send your fax. (You cannot send or receive any faxes until the delayed fax has been sent or cancelled.) ■ Press Menu and select Fax Mode to select Polling mode to receive a fax from another fax machine to which you have dialed (such as a fax information service). Change the setting back to Sending when you're finished. 20 Faxing a Document or Photo