Epson r-d1 User Manual - Page 37
ENTER, Finish, and press
View all Epson r-d1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Use the JOG dial to select the needle you want to adjust and press the ENTER button. The needles indicate the following:. Needle Function E (long needle at the top of the gauge Number of remaining photos R (short needle on the right-side of Photo quality the gauge) E (short needle at the bottom of the Remaining battery power gauge) A (short needle on the left-side of the White balance gauge) Note: For details, see "About the Status Gauge" on page 23. 3. Move the left or right arrow using the JOG dial and press the ENTER button. The selected needle is moved by increments of one each time you press the ENTER button. 4. Repeat step 3 until the needle returns to its original position. 5. Select Finish and press the ENTER button. 6. To calibrate another needle, repeat steps 2 to 5. When you're done, select Finish and press the ENTER button. The settings are saved, and the screen returns to the Camera Settings menu. Taking Pictures 2 2 2 2 2 2 2 2 2 2 32