Epson r-d1 User Manual - Addendum - firmware version 2.0 upgrade features. - Page 51

❏ If you use an extension cord with this product, make sure the total amperage of all devices plugged into the extension cord does not exceed the cord's ampere rating. ❏ Never disassemble, modify, or attempt to repair the battery charger by yourself except as specifically explained in this guide. ❏ Do not use power outlets controlled by wall switches or automatic timers. ❏ Do not use power outlets on the same circuit as large motors or other appliances that may cause voltage fluctuations. ❏ Avoid using outlets on the same circuit as photocopiers or air conditioning systems that regularly switch on and off. ❏ Position this product's power cord so that it will not be stepped on or run over. ❏ Do not place any objects on the power cord or the battery charger. ❏ Keep the power cord straight at the ends and at the points where it enters the transformer. ❏ Do not let the power cord become damaged or frayed. Place the battery charger in a location where people are unlikely to walk on the power code, and the cord is not pinched by items placed upon or against it. ❏ If you cannot insert the plug into the power outlet, contact an electrician. ❏ Use the power cord provided or a 6 to 10 foot UL-approved type SPT-2 or heavier type, 2 X 18 AWG cord with a 125 V 10 A plug and 125 V 7 A connector. When using a memory card ❏ Only memory cards designed for the product's specifications can be used. ❏ The methods for using memory cards vary according to card type. Be sure to refer to the documentation included with your memory card for details. ❏ Do not remove the memory card while the power switch is on. When using the LCD ❏ The LCD monitor on this product may contain a few small bright or dark spots. These are normal and do not mean that your LCD monitor is damaged in any way. ❏ If the LCD monitor on this product is damaged, consult your dealer. ❏ If the liquid crystal solution contained in the LCD monitor on this product leaks out and gets onto your hands, wash them thoroughly with soap and water. If it gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately. ❏ Only use a soft, dry cloth to clean the display. Do not use liquid or chemical cleaners. When storing, maintaining, or transporting the camera ❏ Do not store this product outdoors. ❏ Do not store this product near water. ❏ Do not store this product in a location subject to high temperature or humidity. ❏ Do not store this product in a location subject to rapid changes in temperature or humidity. ❏ Do not store this product in a location subject to direct sunlight or strong light sources. Appendix 51