Fluke 225C User Manual - Page 76
Performing Bushealth Measurements, Selecting the bus type
View all Fluke 225C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Fluke 19xC-2x5C Users Manual The bushealth measurement is based upon the test tool Scope mode. The test tool selects settings that are optimized to the signal characteristics of the selected bus type. It operates in full automatic (ranging and triggering) mode. Test limits are preset, but can be changed, see page 81. For supported bus types and protocols see Chapter 10, Specifications, section 'Fieldbus Measurements'. Note You can perform resistance measurements using the Meter mode to check a suspected cable or bus termination. Performing Bushealth Measurements Caution Fieldbuses often are controlling delicate processes that must not be disturbed. It is strongly recommended to contact the system manager before any connections are made! Selecting the bus type To select the fieldbus type do the following: 1 ANALYZE Open the bushealth/fieldbus main selection screen. 2 Highlight Bushealth. 3 Open the Select Fieldbus menu: 4 Select the bus type. 66