Foxconn P35A-S English manual - Page 112
Copy Create RAID in BIOS.
View all Foxconn P35A-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
2. Copy section 5-2, BIOS Configuration. Shut down the computer, connect SATA hard disks to SATA ports, power on computer again. Press key, get into BIOS, set SATA mode to [RAID], press to save and exit BIOS. PC will reboot. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. IDE Configuration IDE Configuration Help Item SATA Mode Select [RAID] Select SATA Work Mode Max Ports on SATA [6 Ports] ► AHCI Configuration [Press Enter] Intel Matrix Storage ► Primary IDE Master [Not Detected] Manager driver only ► Primary IDE Slave [Not Detected] support on ► Secondary IDE Master [Not Detected] ICH9R( P35A-S ), ► Secondary IDE Slave [Not Detected] not ICH9. ( P35A ) So if your MB is with IDE Detect Time Out (Sec) [35] ICH9 chip, then you can't enable AHCI in Windows XP, Windows Vista has in-box driver. So it's ok. Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults 3. Copy section 5-3, Create RAID in BIOS. Press simultaneously to get into RAID BIOS set up (Intel® Matrix Storage Manager option ROM utility). Configure your new hard disks to RAID0, 1, 5 or 10. Exit RAID BIOS. PC will reboot. 4. The Windows XP is running again and a new hardware of RAID disk was found. Click [Cancel] to skip this Wizard. 5 Click to exit. 105