Foxconn P35A-S English manual - Page 23

2 Front Panel Connector : FP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators. Hard Disk LED Connector (HDD-LED) Connect to the chassis front panel IDE indicator LED. It indicates the active status of the hard disks. This 2-pin connector is directional with +/- sign. Reset Switch (RESET-SW) Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed. Power LED Connector (PWR-LED) Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system's status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode (S1) , the LED is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector is directional with +/- sign. Power Switch Connector (PWR-SW) Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button. 12 + + HDD-LED - PWR-LED - RESET-SW PWR-SW NC EMPTY 9 10 FP1 IrDA Connector : IR This connector supports wireless transmitting and receiving device. 1394a Connector : F_1394 (P35A-S Only) The 1394a expansion cable can be connected to either the front (provided that the front panel of your chassis is equipped with the appropriate interface) or real panel of the chassis. 1 IR 12 +5V EMPTY IRRX GND IRTX TPA+ GND TPB+ +12V EMPTY TPAGND TPB+12V GND Audio Connector : F_AUDIO The audio connector supports HD Audio standard. It provides the Front Audio output choice. 9 10 F_1394 12 PORT1_L AUD_GND PORT1_R PRESENCEJ PORT2_R SENSE1_RETURN SENSE_SEND EMPTY COM Connector : COM1 This motherboard supports another serial RS232 COM port for legacy compatibility. User must purchase a RS232 cable PORT2_L SENSE2_RETURN 9 10 F_AUDIO 16