Fujitsu 5900C Getting Started Guide - Page 18

For FUJITSU ISIS Scanner Driver ■ Preparation Confirm the following items before installing the application. • Take out the Setup CD-ROM from its package, but do not insert the Setup CD-ROM into the CD driver yet. • Connect the scanner correctly to your PC. For details on how to connect the scanner, HINT refer to "2.2 Connecting the Scanner to Your PC" on page 4. ATTENTION When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges. ⇒ If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. 4. Click [Cancel] to close the Wizard window. ■ Installing the FUJITSU ISIS Scanner Driver Windows XP screenshots are used in this HINT section as examples. The windows and operations may vary slightly depending on your OS. 1. Open the hopper. Function Hopper Height Thin Power Thickness Thick Send to Scan ATTENTION Power button Hopper Be sure to open the hopper before turning on the power with the Power button. 5. Insert the "Setup CD-ROM" into the CD drive. ⇒ appears. ATTENTION This screen may not appear when the "Autoplay" setting of your CD drive is off. In this case, run "Install.exe" in this CDROM directly from "Explorer" or "My Computer". 6. Click [INSTALL PRODUCTS] and then click [ISIS Driver]. 2. Press the power button to turn the scanner ON. 3. Turn on your PC and log on to Windows. 10