Fujitsu 5900C Getting Started Guide - Page 28

Appendix 3 REPLACING CONSUMABLES WARNING During its operation, the inside glass of the ADF becomes very hot. Before replacing the consumables, turn its power off and unplug the AC adapter from the outlet. Wait at least 15 minutes. The following illustrations show the locations of the consumables. Refer to "Chapter 5 Replacing Consumables" fi-5900C Operator's Guide on the Setup CD-ROM. Pick roller Separator roller ■ Consumables and Replacement Cycle The followings are the specifications of consumables and their recommended replacement cycles. Description Parts No. Standard Replacement Cycle Pad PA03450- After 600,000 scans or K014 one year Pick rollers PA03450K011 After 600,000 scans or one year Brake roller PA03450K013 After 600,000 scans or one year Separator rollers PA03450K012 After 600,000 scans or one year To purchase consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. The replacement cycles above are rough guidelines when scanning A4/Letter sized, 20lb paper. This cleaning cycle varies according to the type of papers scanned and how frequently the scanner is used and cleaned. ATTENTION Use only the specified consumables. Pad ■ Pad To remove Brake roller Pad To install AP-5