Fujitsu 6010N Getting Started Guide - Page 16

Appendix C Replacing Parts CAUTION The glass scanner windows inside the ADF can become hot when the scanner is used. Before cleaning inside the scanner or replacing any parts, turn off the power, unplug the AC adapter from the outlet, and wait for at least 15 minutes. ■ Part No. and Replacement Cycle for Consumable Parts The usage count of consumable parts can be checked in the "Usage Status" screen on the [Device Status] tab. ATTENTION Use only the PFU LIMITED parts specified. Do not use consumable parts made by other manufacturers. The following diagram shows the locations of the consumable parts in the scanner. For more details, refer to the "Operator's Guide". ■ Pad Assembly (PAD ASSY) ■ Pick Roller Pick roller When parts need to be replaced soon, the "Status" information field becomes orange. When parts need to be replaced immediately, the "Status" information field becomes red. The following table specifies the replacement part numbers and the standard replacement cycles. Part Name Replacement Cycle Pad assembly (Pad ASSY) (PA03289-0111) After every 50,000 sheets scanned or once a year Pick roller (PA03289-0001) After every 100,000 sheets scanned or once a year To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner service provider. These replacement cycles are rough guidelines when using 64 g/m2 (17 lb) A4/Letter woodfree or wood containing paper. They may vary according to the type of documents scanned, scanner usage, and cleaning frequency. 21 Pick roller's shaft ■ Part No. and Replacement Cycle for Carrier Sheet One "Carrier Sheet" is provided with the scanner. If the "Carrier Sheet" provided with the scanner can no longer be used for scanning due to damage or wear-and-tear, you can purchase a new Carrier Sheet separately. The following table specifies the replacement number and the standard replacement cycle for carrier sheets. Part Name No. of items Replacement Cycle Carrier Sheet 5 (PA03360-0013) After used for 500 scans Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider to obtain these products. This replacement cycle is a rough guideline. This may vary according to the type of documents scanned, scanner usage, and cleaning frequency. If parts become noticeably dirty, replace them accordingly. ATTENTION Use only the PFU LIMITED parts specified. Do not use parts made by other manufacturers. The following diagram shows the Carrier Sheet. For more details, refer to the "Operator's Guide". ■ Carrier Sheet 22 fi-6010N Network Scanner Getting Started