Garmin GMX 200 Pilots Guide - Page 16
Power On, Power, Brightness, Rotary Knob, Function FN Key
View all Garmin GMX 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Getting Started Data Card Controls Power On The power switch is located in the upper right corner of the GMX 200. Press the "+" rocker switch to turn the power on. The GMX 200 will progress through a series of startup screens. The final startup screen shows System Information and the results of the Self-Test. Power The power and display brightness are controlled by a rocker switch. Power Rocker Switch Press both the "-" and "+" rocker switches and hold them down for at least three seconds to turn the power off. Brightness Press the "-" and "+" rocker switches individually to adjust the display brightness manually. Press the "-" and "+" rocker switches at the same time for one to three seconds, then release them to have the GMX 200 set the brightness automatically based on current lighting conditions. Rotary Knob The rotary knob on the lower right corner of the GMX 200 is used to move the cursor in Pan mode and to zoom in and out while viewing maps. The rotary knob complements the action of the function keys in some functions by pressing and turning the knob. Arrows will appear above the function keys indicating the direction to turn the rotary knob for the same effect. A round push button symbol ("o") will appear indicating that pressing the rotary knob will have the same effect. Round push-button sym- Arrows indicate rotary knob direction bol indicates the function affected when the rotary knob is depressed Rotary Knob Rotary Knob / Function Keys Function (FN) Key The Function keys are made up of one dedicated key on the lower left side of the display and the four "smart" keys to the right of it. Press the function (FN) key repeatedly to scroll through the available functions. The functions will appear above the "smart" function keys in turquoise. "Smart" Function Key Labels "Smart" Function Keys Function Keys Use the FN key to display a list of the main functions, such as Map, IFR, Terrain, etc. Each time you press the FN key you will step through the list of functions. After you press one of the function "smart" keys at the bottom of the display, the function keys change to provide options to control the display related to the current function, now in green. Change the function keys back to the function list by pressing the FN key. 190-00607-02 Rev C