Garmin eTrex Venture HC Owner's Manual - Page 41
Setup Menu, Display Setup - software version 3
UPC - 753759072872
View all Garmin eTrex Venture HC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setup Menu To access the Setup Menu: From the Main Menu, select Setup. System Setup Page To access the System Setup page: From the Setup Menu, select System. • GPS-choose one of the GPS options other than Normal to save battery power. • WAAS/EGNOS-set Enable or Disable WAAS /EGNOS. • Battery Type-set the Battery Type for more accurate battery capacity status. • External Power Lost-set the unit to turn off if external power is lost. • Proximity Alarms-turn Proximity Alarms on and off (eTrex HCx units only). Use the option menu to restore defaults, or view the version of unit software and the Unit I.D. number. Main Pages Display Setup Page You can choose a display mode, a color scheme for day and for night viewing, adjust the amount of time that the backlight stays on, and set the level of brightness. To access the Display Setup page: From the Setup Menu, select Display. • Display Mode-set for Auto (changes from day to night mode and back again at dusk and dawn), Day only, or Night only. • Daytime/Nightime Color Scheme Selection- set in Day and Night modes to one of 10 color schemes. • Backlight Timeout-choose from Stays On or delays of 15 seconds, 30 seconds, one minute, or two minutes. • Backlight Level-use the slider to adjust the brightness. eTrex HC series Owner's Manual 37