Garmin eTrex Vista Cx Owner's Manual - Page 102
Connecting Your Vista Cx to a, Computer - drivers
UPC - 753759049188
View all Garmin eTrex Vista Cx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
APPENDIX > CONNECTING YOUR VISTA CX TO A COMPUTER Connecting Your Vista Cx to a Computer You can connect your Vista Cx to your computer using the PC/USB connector cable. NOTE: Fully install the supplied MapSource Trip & Waypoint Manager software on your computer before connecting the USB cable to the computer. Follow the instructions for installation and operation provided with the software. To connect your Vista Cx to your computer: 1. Lift the USB port protective cover from the back of the Vista Cx, and insert the smaller connector on the USB cable into the matching port. 2. Connect the remaining cable end to your computer's USB port. Information about USB Drivers The USB drivers are automatically installed when you install the MapSource Trip and Waypoint Manager software that came with your Vista Cx. When you initially connect the Vista Cx to a USB port, your computer might prompt you to locate the destination of the drivers for the device. You only need to install the drivers once. After the drivers are installed, your computer always detects your Vista Cx when it is connected. USB drivers might be updated periodically. You can find updates at www.garmin.com. 92 eTrex Vista Cx Owner's Manual