Garmin eTrex Vista Cx Owner's Manual - Page 60
Calibrating the Electronic Compass, To calibrate the electronic compass
![]() |
UPC - 753759049188
View all Garmin eTrex Vista Cx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
MAIN PAGES > COMPASS PAGE Speed setting Time delay options Heading Setup Page 5. Use the numeric keypad to enter a speed. 6. Highlight the for more than field, and press Enter to set the time delay from the time options list. Calibrating the Electronic Compass When you first use the Vista Cx or after you install new batteries, you have to calibrate the electronic compass outdoors. The accuracy of the electronic compass is adversely affected if the unit is not held level or you are near objects that generate magnetic fields, such as cars or buildings. 50 To calibrate the electronic compass: 1. Press the Menu key to open the Compass Page Options menu. 2. Highlight Calibrate Compass, and press Enter to open the Calibration Page. 3. With the Start button highlighted, press Enter, and follow on-screen directions for holding and turning the unit. Calibration Compass Page A "Just Right," "Too Fast," or "Too Slow" message appears notifying you to adjust your turning speed, as needed. Hold the unit level while turning. A "Calibration Successful" message appears when finished. Calibration Progress Page If a "Calibration Failed" message appears, repeat the process. eTrex Vista Cx Owner's Manual
![](/manual_guide/products/garmin-0100043900-owners-manual-06a774b/60.png)