GE JP389BJBB Use and Care Manual - Page 28

Before you begin Read these instructions carefully. completely Important--Save local inspector's these instructions use. Important--Observe and ordinances. all governing and for codes NOTE TO INSTALLER--Be sure to leave these instructions with the Consumer. NOTE: This appliance grounded. must be properly Unless very knowledgeable in the installation of this product, engage a professional installer. Tools You Will Need • _w • Flat blade screwdriver • Electrician's pliers • Duct tape • Measuring tape or scale • Carpenter's square • Wrench or socket set • Drill and drill bit • Sheet metal screws • Junction box NOTE: Installation of this unit requires 2 people. Do not attempt to install without assistance. 30" Cooktop (Dimensions for reference only) Electrical Requirements CAUTION: FOR PERSONAL SAFETY, REMOVE HOUSE FUSE OR CIRCUIT BREAKER BEFORE BEGINNING INSTALLATION. This appliance must be supplied with the proper w)ltage and frequency, as listed in these Installation Instructions, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or time delay fuse. Proper electrical ratings should be verified with listing on product's rating plate. The rating plate is located on the right-hand side of the exhaust plenum. All wire connections must be made in accordance with local codes and properly insulated. Check with your local utility for governing electrical codes and ordinances. In the absence of local electrical codes, the National Electrical Code, ANSI/NFPA No. 70-Latest Edition, governing electric range installations, must be followed. A copy of the National Electrical Code can be obtained by writing to: National Fire Protection Association Batterymarch Park Quincy, MA 02260 NOTE: Electrical installation kit JXCK89 may be ordered separately and includes all the parts necessary to connect the cooktop to typical rough-in wiring. Unit must be vented to the outside! 14- 21%d" I_ 29%" _"l 28 " 20_iZ'_ 27_/S' _ 28%"