GE PFDS455GLMG Use and Care Manual - Page 36
Reverse Door Handle, And Caps, And Caps Cont.
UPC - 084691226642
View all GE PFDS455GLMG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installation Instructions REVERSING THE DOOR SWING (if desired) 3 REVERSE DOOR HANDLE AND CAPS A Lay the chrome cover down on a soft, protected, flat surface so that the inner part faces upward (resting on the handle side). Disassemble the door cap from the chrome cover on the handle side by removing 2 screws (#8 x 0.625″ tapping screws). 3 REVERSE DOOR HANDLE AND CAPS (CONT.) C Pop the 2 handle caps out toward you and reassemble on the opposite side of the chrome cover, where you removed the outer handle. 2 x D Screws Handle caps Door cap B Disassemble the outer handle from the inner handle by removing 3 screws (#8 x 0.625″ tapping screws). Disassemble the inner handle from the chrome cover by removing 4 screws (#8 x 0.625″ tapping screws). 3 x D Screws (Outer handle) Remove 4 x D screws (Inner handle) Inner handle D Assemble the inner handle onto the opposite side of the chrome cover, using 4 screws (#8 x 0.625″ tapping screws). Inner handle Replace 4 x D screws (Inner handle) 36