GE PFDS455GLMG Use and Care Manual - Page 43
Installation Instructions, INSTALLING THE PEDESTAL if desired
UPC - 084691226642
View all GE PFDS455GLMG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installation Instructions INSTALLING THE PEDESTAL (if desired) CAUTION - Due to the size and weight of these products, and to reduce the risk of personal injury or damage to the product, TWO PEOPLE ARE REQUIRED FOR PROPER INSTALLATION. KIT CONTENTS INSTALLATION PREPARATION Remove the packaging. The drawer divider is taped at the top of the shipping carton. Remove the divider and set aside for final installation. Flatten the product carton to use as a pad to lay the washer or dryer down on its side. Continue using the carton to protect the finished floor in front of the installation location. r4 Support pads rDrawer divider r4 Mounting screws TOOLS YOU WILL NEED rPhillips-head screwdriver r7 mm Socket wrench 1 REMOVE THE LEVELING LEGS A Carefully lay the washer or dryer on its side to access the leveling legs on the bottom of the appliance. IMPORTANT: Do not lay the washer or dryer on its back! Do not remove the shipping bolts on the back side of the washer. The bolts must remain in place until the washer is returned to an upright position. B Use an open-end wrench to remove the washer or dryer leveling legs. r9/16″ Open-end wrench or adjustable wrench Back out and remove all 4 leveling legs 43