GE PFDS455GLMG Use and Care Manual - Page 39
Reinstall Door Assembly
UPC - 084691226642
View all GE PFDS455GLMG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installation Instructions REVERSING THE DOOR SWING (if desired) 7 REINSTALL DOOR ASSEMBLY Place the door back on the dryer front panel, making sure the latch is engaged and the hinge is sitting in the two openings in the dryer front. Assemble the door to the front cabinet, using 2 screws (#10 x 0.75″ tapping screws). Install 2 x B screws Install the new left-hand hinge cap (from the reversibility kit) onto the hinge, by opening the dryer door and screwing the hinge cap into place. NOTE: Save the remaining caps and covers in case you want to reverse the hinge again. Hinge cap 1 x C Screw in hinge cap 39
39
REINSTALL DOOR ASSEMBLY
Place the door back on the dryer front panel,
making sure the latch is engaged and the hinge
is sitting in the two openings in the dryer front.
Assemble the door to the front cabinet, using
2 screws (#10 x 0.75
″
tapping screws).
Install 2 x B
screws
7
Install the new left-hand hinge cap (from the
reversibility kit) onto the hinge, by opening the
dryer door and screwing the hinge cap into place.
NOTE: Save the remaining caps and covers in case
you want to reverse the hinge again.
1 x C Screw
in hinge cap
Hinge cap
REVERSING THE DOOR SWING (if desired)
Installation Instructions