GE PFDS455GLMG Use and Care Manual - Page 37
Reverse Door Handle, And Caps Cont., Reverse Hinge And Caps Cont., Reverse Hinge And Caps
![]() |
UPC - 084691226642
View all GE PFDS455GLMG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installation Instructions 3 REVERSE DOOR HANDLE AND CAPS (CONT.) E Reassemble the outer handle to the inner handle, using 3 screws (#8 x 0.625″ tapping screws). REVERSE HINGE AND CAPS (CONT.) Outer window Snap Outer handle 3 x D Screws (inner handle) F Assemble the new right-side door cap (from reversibility kit), using 2 screws (#8 x 0.625″ tapping screws). Inner cover (Mask) Snap 2 x D Screws Door cap Put the chrome cover aside on a soft, protected flat surface. 4 REVERSE HINGE AND CAPS • Lay the inner door down on a soft , protected flat surface so that the inner part faces down. Disassemble the outer window by opening 2 snaps, lay the outer window on a soft, protected flat surface. • Disassemble the inner cover (mask) by opening 2 snaps, lay the inner cover (mask) on a soft, protected flat surface. • Turn the inner door on a soft , protected flat surface so that the inner part faces up. • Remove the screws, nuts and washers on the opposite side of the hinge, using a quadrex screwdriver. • Disassemble the inner door cap from the inner door by removing 2 screws (#8 x 0.75″ tapping screws). • Disassemble the hinge from the inner door by removing 4 screws (#8-32 x 0.50″ machine screws). Hinge 2 screws, 2 nuts and Remove 2 washers 4 x E screws Inner door cap 2 x D Screws 37
![](/manual_guide/products/general-electric-pfds455glmg-use-care-manual-5f13dc3/37.png)