Gigabyte GA-6UASL1 Manual - Page 41

SATA Controller Configuration

Get Gigabyte GA-6UASL1 PDF manuals and user guides View all Gigabyte GA-6UASL1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

2-2-5 SATA Controller Configuration SATA Controller When enabled, the SATA controller will function normally. Options available: Enabled/Disabled. Default setting is Enabled. SATA Mode Select the on chip SATA type. IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode. This is not allowed to access RAID setup utility. RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will be allows access the RAID setup utility at boot time. ACHI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID function is disabled and cannot be access the RAID setup utility at boot time. Options available: IDE/RAID/ACHI. Default setting is ACHI Mode. SATA Port 0/1/2/3/4/5 Displays the installed HDD devices. BIOS Setup - 41 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
BIOS Setup
- 41 -
SATA Controller
When enabled, the SATA controller will function normally.
Options available: Enabled/Disabled. Default setting is
Enabled
.
SATA Mode
Select the on chip SATA type.
IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the
IDE emulation mode. This is not allowed to access RAID setup utility.
RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will
be allows access the RAID setup utility at boot time.
ACHI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID func
-
tion is disabled and cannot be access the RAID setup utility at boot time.
Options available: IDE/RAID/ACHI. Default setting is
ACHI Mode
.
SATA Port 0/1/2/3/4/5
Displays the installed HDD devices.
2-2-5
SATA Controller Configuration