Gigabyte GA-Z170X-SOC User Manual - Page 11
Support for RAID 0, RAID 1, and RAID 10, x Trusted Platform Module TPM header
View all Gigabyte GA-Z170X-SOC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Storage Interface USB Internal Connectors Chipset: - 3 x M.2 Socket 3 connectors - 3 x SATA Express connectors - 6 x SATA 6Gb/s connectors (SATA3 0~5) - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * Refer to "1-9 Internal Connectors," for the supported configurations with the M.2, SATA Express, and SATA connectors. ASMedia® ASM1061 chip: - 2 x SATA 6Gb/s connectors (SATA3 6~7), supporting AHCI mode only Chipset+Intel® USB 3.1 Controller: - 1 x USB Type-C™ port on the back panel, with USB 3.1 support - 1 x USB 3.1 port on the back panel Chipset: - 5 x USB 3.0/2.0 ports on the back panel - 8 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports onboard, 4 ports available through the internal USB headers) Chipset+Renesas® USB 3.0 Hub: - 4 x USB 3.0/2.0 ports (available through the internal USB headers) 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x 4-pin ATX 12V power connector 1 x OC PEG Power Connector 3 x SATA Express connectors 8 x SATA 6Gb/s connectors 3 x M.2 Socket 3 connectors 1 x CPU fan header 1 x water cooling fan header (CPU_OPT) 6 x system fan headers 1 x I/O shield audio LED power connector 1 x Thunderbolt™ add-in card connector * Does not support device plug and play as well as surprise removal while system is powered on. 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 2 x USB 3.0/2.0 headers 2 x USB 2.0/1.1 headers 2 x USB 2.0/1.1 ports 1 x Trusted Platform Module (TPM) header 1 x serial port header 1 x Clear CMOS jumper 1 x power button 1 x reset button 1 x Clear CMOS button 1 x Gear button 1 x OC Tag button 1 x OC Trigger switch - 11 - Hardware Installation