Gigabyte GA-Z170X-SOC User Manual - Page 21
D. Installing the OC Brace, graphics cards to the OC Brace.
View all Gigabyte GA-Z170X-SOC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
D. Installing the OC Brace(Note 3) OC Brace allows extreme overclockers and system testers to safely install up to four graphics cards in an open case or test bed without risking PCIe slot damage or preventing cards not showing up in the OS due to poor contact with PCIe slot. Refer to the following installation instructions: Step 1: As shown, align the screw holes in the OC Brace and back plate with the screw holes near the PCIe slots on the motherboard. Step 2: Fasten the two included thumb screws (starting from the screw hole near the back panel audio connectors). Step 3: After installing the graphics cards, use the included thumb screws to secure the metal brackets of the graphics cards to the OC Brace. (Note 1) The bridge connectors may be needed or not depending on your graphics cards. (Note 2) When two or more graphics cards are installed, we recommend that you connect the power cable from the power supply to the OC_PEG connector to ensure system stability. (Note 3) The components received may vary in appearance from the products illustrated. Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and driver version. Refer to the manual that came with your graphics cards for more information about enabling CrossFire/SLI technology. - 21 - Hardware Installation