Haier HTN13G11F User Guide - Page 9

English Installation Instructions Start Up Follow the steps below to get your TV connected and ready for watching. 1. Plug in Your TV - Plug the power cord into the 2-prong outlet. 4. Turn on the TV - Press the power button on the TV set or remote control. power button POWER 2. Hook Up Your TV - Connect the cable or antenna to the provided connection on the back of the TV. Note: The TV antenna or cable wire is not included with the television set. You need to purchase an antenna if you are not going to hook up cable service. If you already have a cable service, connect the existing cable wire that your local cable company provided at the time of your cable installation. RECALL CH+ RATING VOL- VOL+ CHSLEEP MUTE 5. Place All Available Channels in Memory - Press the menu button 5 times, for the Preset menu. By selecting "Auto Search", it will set up all available channels into the memory. If you want to add or delete channels from memory, do so by going into "Add/Delete" mode. (Refer to the Preset menu on p.32) 3. Put Batteries in the Remote Control - Place 2 AAA sized batteries (batteries supplied) into the remote control compartment by matching the (+) and (-) ends of each battery. 6. Set the Time - To set the time, go to the Clock menu by pressing the menu button 4 times. Follow the instructions. (Refer to Clock menu on p.30) batteries 7