Harman Kardon TRAFFIC PRO Owners Manual - Page 11

UUSS eenggllisshh 4.1. General instructions • Radio or CD operation continues in navigation mode. The distance to the next message and estimated time of arrival are shown on the right side of the display. • When route guidance is active, press Rad to enter radio mode. Press CD to switch to CD mode. The Navigation menu automatically displays when navigation announcements are given. • When entering the address, only those letters, digits and symbols needed to make a coherent address are displayed. The entries are automatically completed. Spaces (e.g. as in New York) must be entered using the underscore character (_). Letters, numbers and symbols can be selected by pressing the multifunction keys 1 to 9 . Select the individual symbols by pressing the appropriate multifunction keys repeatedly. You can also use the right control knob for your selection. This mode of selection will be used in the remainder of this guide. • Nav quits the current menu and displays the previous menu. • The system recalculates the route if a deviation is made. • Press the left control knob to hear the current navigation announcement. • During a navigation announcement, you can adjust the volume with the left control knob and the tone by pressing the key (see also page 9). • Briefly press the left control knob to request additional information during route guidance, or the current position when route guidance is not active. See "Information during route guidance" on page 21. • You can interrupt the current navigation announcement by pressing the left control knob . • If you press and hold the left control knob for more than 2 seconds during a navigation message, the navigation audio messages are deactivated and route guidance will only be shown on the display. Briefly press the left control knob to reactivate the navigation audio announcements. • The scroll marks and indicate a selection list through which you can scroll using the right control knob . You can select the entry displayed in bold type by pressing the right control knob . 4.2. Confirm Warning Before you can use the navigation system, a warning appears. DO NOT PROGRAM WHILE DRIVING. PRESS OK I. YOU UNDERSTAND INSTRUCTIONS IN MANUAL When you confirm the receipt of this warning you state that you have read and understood the user guide and that you are aware of the dangers associated with the use of this navigational equipment. Press the right control knob to confirm the selection. 4.3. Selecting Navigation Press Nav . If necessary, confirm the warning as described above. NAVIGATION IS BEING ACTIVATED! PLEASE OBSERVE TRA..IC LAWS Next, the main navigation menu appears. 10 4. Using Navigation