HP 11642 HP Rack Options Installation Guide for the 11000 G2 Series Rack and t - Page 36
and secure to the rack frame 2., Using a T-25 Torx driver
![]() |
View all HP 11642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
NOTE: The screw holes for the cross-over bracket are located on the side of the rear rack screw column, towards the inside of the rack. 2. Using a T-25 Torx driver, insert two M5.5 x 10-mm Torx screws on either side of the cross-over bracket and secure to the rack frame (2). Cable Management Bracket kit 36
![](/manual_guide/products/hewlettpackard-11622-hp-rack-options-installation-guide-11000-g2-series-rack-hp-intelligent-series-racks-d56d586/36.png)
Cable Management Bracket kit
36
NOTE:
The screw holes for the cross-over bracket are located on the side of the rear rack screw
column, towards the inside of the rack.
2.
Using a T-25 Torx driver, insert two M5.5 x 10-mm Torx screws on either side of the cross-over bracket
and secure to the rack frame (2).