HP 11642 HP Rack Options Installation Guide for the 11000 G2 Series Rack and t - Page 48
Ground Bonding kit, About this device, Kit contents, Required tools
View all HP 11642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Ground Bonding kit About this device The Ground Bonding kit reduces the electromagnetic emissions outside of the HP 11000 G2 Series Racks and Intelligent Series Racks. These emissions are produced during normal operation of the electronic components within the rack. Typically, rack-mounted equipment must meet class A emissions levels, but you might want to reduce these levels even further. Use this kit to tie all the conductive structural components together with conductive cables, and then attach the kit to a ground bonding point on the AC power distribution device of the rack or the building ground. Kit contents Item Quantity 15.24-cm (6-in) grounding straps 3 36.83-cm (14.5-in) grounding straps 3 15.24-cm (6-in) grounding straps 6 (with a connector on one end) 36.83-cm (14.5-in) grounding straps 6 (with a connector on one end) M8 nut 12 Internal serrated lock washer 11 M8 x 20 hex head screw 1 Self-tapping 5.5 x 10 screw 10 6.2 Paint cutter washer 1 8.4 Paint cutter washer 1 M6 x 10 low HD cap screw 1 This kit might contain extra hardware for your convenience. Required tools The following tools are required for installation: • T-25 Torx driver • M8 socket Installing the ground bonding rack option kit Attach the appropriate grounding straps to the following locations. From the system chassis to the front door (without a grounding lug): 1. Remove the rack front door. Ground Bonding kit 48