HP 17-bs000 Maintenance and Service Guide - Page 49
Bottom cover, Remove the nine Phillips PM PM2.5×7.5 screws
View all HP 17-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Bottom cover Description Bottom cover for use in models of the following colors: Pike silver Silk gold Smoke gray Marine blue Amethyst purple Pale mint Champagne rose Jet black Snow white Empress red Rose gold Spare part number 926493-001 926494-001 926495-001 926496-001 926497-001 926498-001 926499-001 926500-001 926501-001 926502-001 926503-001 Before removing the bottom cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34). To remove the bottom cover: 1. Position the computer upside down with the front toward you. 2. Remove the four rubber feet (1). 3. Remove the nine Phillips PM PM2.5×7.5 screws (2) that secure the bottom cover to the computer. Component replacement procedures 41