HP 17-bs000 Maintenance and Service Guide - Page 61
Optical drive connector, Disconnect the optical drive connector cable from the system board
View all HP 17-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Optical drive connector Description Optical drive connector Spare part number 926521-001 Before removing the optical drive connector, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34). 6. Remove the bottom cover (see Bottom cover on page 41). To remove the optical drive connector: 1. Disconnect the optical drive connector cable from the system board (1). 2. Remove the Phillips PM2.0×4.0 screw (2) that secures the optical drive connector to the computer. 3. Remove the optical drive connector and cable (3). Reverse this procedure to install the optical drive connector. Component replacement procedures 53