HP 17-bs000 Maintenance and Service Guide - Page 65
Speakers, Remove the cable from the routing path
View all HP 17-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Speakers Description Speakers (includes left and right speakers and cable) Spare part number 926558-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34). 6. Remove the bottom cover (see Bottom cover on page 41). To remove the speakers: 1. Disconnect the speaker cable from the system board (1). 2. Remove the cable from the routing path (2). 3. Lift the speakers out of the computer (3). NOTE: When installing the speakers, make sure the rubber grommets (4) that secure the speakers are correctly installed. Reverse this procedure to install the speakers. Component replacement procedures 57