HP 17-bs000 Maintenance and Service Guide - Page 87
Power button board
View all HP 17-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Power button board Description Power button board Power button board cable Spare part number 926529-001 926517-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34). 6. Remove the bottom cover (see Bottom cover on page 41). 7. Remove the fan/heat sink (see Heat sink assembly on page 59). 8. Remove the display (see Display assembly on page 67). To remove the power button board: 1. Disconnect the cable from the power button board (1). 2. Remove the Phillips PM2.0×2.0 screw (2) that secures the board to the computer. 3. Remove the power button board from the computer (3). Reverse this procedure to install the power button board. Component replacement procedures 79