HP 17-bs000 Maintenance and Service Guide - Page 51
Hard drive, Remove the battery see
View all HP 17-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive cover. Description 2-TB, 5400-rpm, 2.5 inch 1-TB, 5400-rpm, 2.5 inch 500-GB, 5400-rpm, 2.5 inch Hard drive holder Spare part number 912487-855 676423-855 683839-855 905974-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34). 6. Remove the bottom cover (see Bottom cover on page 41). To remove the hard drive: 1. Disconnect the USB board cable from the system board and remove it from atop the hard drive. Component replacement procedures 43