HP 3700 HP Color LaserJet 3550 and 3700 series - User Guide - Page 149

Size In Tray X - 41 5 unexpected type in tray

Page 149 highlights

Control panel messages (continued) Control panel message Description Recommended action 40 BAD SERIAL TRANSMISSION alternates with To continue press A serial data error (parity, framing, or line overrun) has occurred while the printer was receiving data. For the HP Color LaserJet 3700 series printer only. 1. Press to continue printing. NOTE A loss of data will occur. 2. If the message persists, contact HP Support. 40 EIO X BAD TRANSMISSION To continue press A connection with the card in EIO slot X has been abnormally broken. For the HP Color LaserJet 3700 series printer only when an EIO device is installed. 1. Press to continue printing. NOTE A loss of data will occur. 2. If the message persists, contact HP Support. 41.3 UNEXPECTED SIZE IN TRAY X alternates with LOAD TRAY X Paper is loaded that is longer or shorter in the feed direction than the size configured for the tray. 1. Load the paper as instructed. 2. Press to print. 3. If the incorrect size was selected, press STOP to cancel the job or press for help. 4. If the incorrect tray was selected, press Stop to cancel the job. 5. Configure the trays correctly and resend the job. Ensure all trays are configured correctly before printing again. See Configuring trays for more information. 41.5 UNEXPECTED TYPE IN TRAY X alternates with LOAD TRAY X The printer senses a different paper type in the paper path than what is configured in the tray. 1. Load the paper as instructed. 2. Press to print. 3. If the incorrect type was selected, press STOP to cancel the job or press for help. 4. Configure the trays correctly and resend the job. Ensure all trays are configured correctly before printing again. See Configuring trays for more information. 41.X PRINTER ERROR alternates with To continue press A printer error has occurred. 1. Press to continue or press for more information. 2. If the message persists after exiting help, turn the printer off and then back on. 3. If the message still persists, contact HP Support. ENWW Control panel messages 137

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Control panel message
Description
Recommended action
40 BAD SERIAL
TRANSMISSION
alternates with
To continue press
A serial data error (parity, framing, or
line overrun) has occurred while the
printer was receiving data.
For the HP Color LaserJet 3700 series
printer only.
1.
Press
to continue printing.
NOTE
A loss of data will occur.
2.
If the message persists, contact
HP Support.
40 EIO X BAD
TRANSMISSION
To continue press
A connection with the card in EIO slot X
has been abnormally broken.
For the HP Color LaserJet 3700 series
printer only when an EIO device is
installed.
1.
Press
to continue printing.
NOTE
A loss of data will occur.
2.
If the message persists, contact
HP Support.
41.3 UNEXPECTED
SIZE IN TRAY X
alternates with
LOAD TRAY X
<TYPE> <SIZE>
Paper is loaded that is longer or shorter
in the feed direction than the size
configured for the tray.
1.
Load the paper as instructed.
2.
Press
to print.
3.
If the incorrect size was selected,
press
S
TOP
to cancel the job or
press
for help.
4.
If the incorrect tray was selected,
press
Stop
to cancel the job.
5.
Configure the trays correctly and
resend the job.
Ensure all trays are configured correctly
before printing again. See
Configuring
trays
for more information.
41.5 UNEXPECTED
TYPE IN TRAY X
alternates with
LOAD TRAY X
<TYPE> <SIZE>
The printer senses a different paper type
in the paper path than what is configured
in the tray.
1.
Load the paper as instructed.
2.
Press
to print.
3.
If the incorrect type was selected,
press
S
TOP
to cancel the job or
press
for help.
4.
Configure the trays correctly and
resend the job.
Ensure all trays are configured correctly
before printing again. See
Configuring
trays
for more information.
41.X
PRINTER ERROR
alternates with
To continue press
A printer error has occurred.
1.
Press
to continue or press
for
more information.
2.
If the message persists after exiting
help, turn the printer off and then
back on.
3.
If the message still persists, contact
HP Support.
Control panel messages (continued)
ENWW
Control panel messages
137