HP 3700 HP Color LaserJet 3550 and 3700 series - User Guide - Page 64
Network configuration, Configuring TCP/IP parameters
UPC - 808736551106
View all HP 3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Network configuration NOTE NOTE The network configuration feature is available for the HP Color LaserJet 3700 series printer when an EIO device is installed. You might need to configure certain network parameters on the printer. You can configure these parameters from the printer control panel, the embedded Web server, or for most networks, from the HP Web Jetadmin software or the HP toolbox. For more information about using the embedded Web server, see Using the embedded Web server (HP Color LaserJet 3700 series printer only). For a complete list of supported networks and for instructions on configuring network parameters from software, see the HP Jetdirect Print Server Administrator's Guide. The guide comes with printers in which an HP Jetdirect print server is installed. This section contains the following instructions for configuring network parameters from the printer control panel: ● configuring TCP/IP parameters ● disabling unused network protocols Configuring TCP/IP parameters You can use the printer control panel to configure the following TCP/IP parameters: ● usage of the BOOTP file for configuration parameters (the default is to use the BOOTP file) ● IP address (4 bytes) ● subnet mask (4 bytes) ● default gateway (4 bytes) ● idle TCP/IP connection timeout (in seconds) 52 Chapter 3 I/O configuration ENWW