HP 6100 EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007) - Page 49
Adding a Logical Drive, EZPilot - Management New Logical Drive, Storage Devices
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Adding a Logical Drive EZPilot Manager enables you to create a new logical drive. Click New Logical Drive on the Logical Drive tab to create and assign a logical drive to the selected storage device. The New Logical Drive button is enabled when there is unallocated space left on the drive. Note: If you did not obtain a Command View license when you installed EZPilot Manager you will be prompted to obtain one when you attempt to create logical drives. Refer to "To obtain a Command View License:" on page 5 for instructions. Note: You must be in storage view to add a logical drive. You cannot add a logical drive from the host or switch views. To create and assign a logical drive: 1. Do one of the following: • From the Menu bar, click View, then click Storage Devices. • From the Toolbar, click the Storage View button. 2. From the discovery-tree, select the storage device to which you want to add a logical drive. 3. Select the Logical Drives tab and click New Logical Drive. Or Right-click on the selected storage device and select New Logical Drive. 4. The EVA host configuration is automatically determined and updated if necessary. (If you have not installed a Command View EVA license, the EZPilot EVA Configuration license dialog box appears. This dialog box is identical to the EZPilot EVA Setup license dialog box. See "To obtain a Command View License:" on page 5 for information on obtaining and installing a license. Click Next after choosing a license option.) The EZPilot Add Logical Drive Wizard Welcome page appears. Figure 40: The EZPilot Manager Add Logical Drive Wizard EZPilot - Management Section Page 45