HP 6840 HP Deskjet 6800 Printer series - (Macintosh OS X) User's Guide - Page 52

The network - install software

Page 52 highlights

HP Deskjet 6800 series printer User's Guide 2. Verify that the printer is powered on. 3. Connect the Ethernet cable to an available port on the network hub or router. Note: Do not plug the Ethernet cable into a port labeled WAN or Uplink. 4. Connect the Ethernet cable to the Ethernet port on the back of the printer. Note: The printer's wireless radio is disabled when a Ethernet cable is connected to the printer. 5. Do one of the following: State of the Link light Task On Go to step 6. Off Repeat steps 2 through 4. If the lights are still off, then verify the following items: • The printer is powered on. • The network hub or router is powered on. • All cable connections are secure. • You are using an Ethernet cable. 6. Print an HP Report page. 7. Install the printer software on each computer that will use the printer. Caution: It is recommended that the printer and the computers that use it be on the same subnet. Printer installation across subnets can be problematic depending on the type of router used. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176

2.
Verify that the printer is powered on.
3.
Connect the
Ethernet cable
to an available port on the network
hub
or
router
.
Note:
Do not plug the Ethernet cable into a port labeled
WAN
or
Uplink
.
4.
Connect the Ethernet cable to the Ethernet port on the back of the printer.
Note:
The printer's wireless radio is disabled when a Ethernet cable is
connected to the printer.
5.
Do one of the following:
State of the Link light
Task
On
Go to step 6.
Off
Repeat steps
2 through 4
. If the lights are still off, then
verify the following items:
The printer is powered on.
The network
hub
or
router
is powered on.
All cable connections are secure.
You are using an
Ethernet cable
.
6.
Print an HP Report page
.
7.
Install the
printer software
on each computer that will use the printer.
Caution: It is recommended that the printer and the computers that use it be
on the same subnet. Printer installation across subnets can be problematic
depending on the type of router used.
HP Deskjet 6800 series printer User's Guide
52